This is the latest recevied telemetry packets stored in our database for station/object SQ3OPF-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1744822869 | 201 Count | 389 Count | 116 Count | 0 VDC | 0 VDC |
| 1744821969 | 197 Count | 381 Count | 113 Count | 0 VDC | 0 VDC |
| 1744821067 | 195 Count | 375 Count | 112 Count | 0 VDC | 0 VDC |
| 1744820166 | 192 Count | 369 Count | 110 Count | 0 VDC | 0 VDC |
| 1744819266 | 189 Count | 364 Count | 108 Count | 0 VDC | 0 VDC |
| 1744818365 | 173 Count | 340 Count | 93 Count | 0 VDC | 0 VDC |
| 1744817464 | 171 Count | 334 Count | 92 Count | 0 VDC | 0 VDC |
| 1744816564 | 170 Count | 327 Count | 92 Count | 0 VDC | 0 VDC |
| 1744815662 | 168 Count | 319 Count | 91 Count | 0 VDC | 0 VDC |
| 1744814762 | 167 Count | 311 Count | 91 Count | 0 VDC | 0 VDC |
| 1744813861 | 153 Count | 291 Count | 78 Count | 0 VDC | 0 VDC |
| 1744812961 | 152 Count | 287 Count | 78 Count | 0 VDC | 0 VDC |
| 1744812060 | 151 Count | 280 Count | 78 Count | 0 VDC | 0 VDC |
| 1744811159 | 148 Count | 274 Count | 76 Count | 0 VDC | 0 VDC |
| 1744810258 | 147 Count | 269 Count | 76 Count | 0 VDC | 0 VDC |
| 1744809357 | 145 Count | 264 Count | 75 Count | 0 VDC | 0 VDC |
| 1744808457 | 144 Count | 258 Count | 75 Count | 0 VDC | 0 VDC |
| 1744807556 | 142 Count | 253 Count | 74 Count | 0 VDC | 0 VDC |
| 1744804571 | 137 Count | 253 Count | 74 Count | 0 VDC | 0 VDC |
| 1744803670 | 136 Count | 249 Count | 74 Count | 0 VDC | 0 VDC |
| 1744802769 | 134 Count | 244 Count | 73 Count | 0 VDC | 0 VDC |
| 1744801869 | 131 Count | 239 Count | 71 Count | 0 VDC | 0 VDC |
| 1744800968 | 129 Count | 233 Count | 70 Count | 0 VDC | 0 VDC |
| 1744800067 | 127 Count | 228 Count | 69 Count | 0 VDC | 0 VDC |
| 1744799166 | 125 Count | 224 Count | 68 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)