This is the latest recevied telemetry packets stored in our database for station/object SP6RJ-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1759891229 | 933 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1759890628 | 929 Count | 0 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1759890028 | 923 Count | 0 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1759889428 | 917 Count | 0 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1759888828 | 910 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1759888227 | 903 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1759887626 | 898 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1759887026 | 894 Count | 0 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1759886426 | 888 Count | 0 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1759885826 | 882 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1759885226 | 878 Count | 0 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1759884625 | 870 Count | 0 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1759884031 | 864 Count | 0 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1759883431 | 858 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1759882830 | 854 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1759882230 | 848 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1759881633 | 843 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1759881030 | 836 Count | 0 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1759880430 | 830 Count | 0 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1759879829 | 822 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1759879228 | 817 Count | 0 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1759878628 | 813 Count | 0 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1759878027 | 808 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1759877427 | 803 Count | 0 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1759876827 | 797 Count | 0 Count | 0 Count | 4.34 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)