This is the latest recevied telemetry packets stored in our database for station/object SP2ROC-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773824855 | 244 Count | 651 Count | 151 Count | 0 VDC | 0 VDC |
| 1773824434 | 242 Count | 646 Count | 150 Count | 0 VDC | 0 VDC |
| 1773824014 | 240 Count | 640 Count | 149 Count | 0 VDC | 0 VDC |
| 1773823593 | 237 Count | 633 Count | 147 Count | 0 VDC | 0 VDC |
| 1773823172 | 234 Count | 626 Count | 145 Count | 0 VDC | 0 VDC |
| 1773822752 | 233 Count | 621 Count | 145 Count | 0 VDC | 0 VDC |
| 1773822331 | 229 Count | 613 Count | 142 Count | 0 VDC | 0 VDC |
| 1773821910 | 227 Count | 608 Count | 141 Count | 0 VDC | 0 VDC |
| 1773821490 | 222 Count | 599 Count | 137 Count | 0 VDC | 0 VDC |
| 1773821069 | 221 Count | 592 Count | 137 Count | 0 VDC | 0 VDC |
| 1773820648 | 218 Count | 588 Count | 135 Count | 0 VDC | 0 VDC |
| 1773820228 | 215 Count | 580 Count | 133 Count | 0 VDC | 0 VDC |
| 1773819807 | 212 Count | 572 Count | 131 Count | 0 VDC | 0 VDC |
| 1773819384 | 210 Count | 567 Count | 130 Count | 0 VDC | 0 VDC |
| 1773818963 | 208 Count | 561 Count | 129 Count | 0 VDC | 0 VDC |
| 1773818543 | 205 Count | 557 Count | 127 Count | 0 VDC | 0 VDC |
| 1773818122 | 202 Count | 548 Count | 125 Count | 0 VDC | 0 VDC |
| 1773817702 | 200 Count | 542 Count | 124 Count | 0 VDC | 0 VDC |
| 1773817281 | 197 Count | 532 Count | 122 Count | 0 VDC | 0 VDC |
| 1773816860 | 195 Count | 523 Count | 121 Count | 0 VDC | 0 VDC |
| 1773816440 | 193 Count | 519 Count | 120 Count | 0 VDC | 0 VDC |
| 1773816019 | 189 Count | 506 Count | 117 Count | 0 VDC | 0 VDC |
| 1773815598 | 186 Count | 497 Count | 115 Count | 0 VDC | 0 VDC |
| 1773815178 | 183 Count | 490 Count | 113 Count | 0 VDC | 0 VDC |
| 1773814757 | 180 Count | 483 Count | 111 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)