This is the latest recevied telemetry packets stored in our database for station/object SP2WH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1745051107 | 665 Count | 1035 Count | 655 Count | 0 VDC | 0 VDC |
| 1745049306 | 579 Count | 915 Count | 570 Count | 0 VDC | 0 VDC |
| 1745047505 | 521 Count | 817 Count | 513 Count | 0 VDC | 0 VDC |
| 1745045705 | 443 Count | 693 Count | 436 Count | 0 VDC | 0 VDC |
| 1745043904 | 390 Count | 617 Count | 384 Count | 0 VDC | 0 VDC |
| 1745042103 | 328 Count | 513 Count | 323 Count | 0 VDC | 0 VDC |
| 1745040303 | 274 Count | 428 Count | 270 Count | 0 VDC | 0 VDC |
| 1745038502 | 218 Count | 347 Count | 215 Count | 0 VDC | 0 VDC |
| 1745036702 | 155 Count | 255 Count | 153 Count | 0 VDC | 0 VDC |
| 1745034901 | 106 Count | 183 Count | 105 Count | 0 VDC | 0 VDC |
| 1745033100 | 49 Count | 83 Count | 49 Count | 0 VDC | 0 VDC |
| 1745031300 | 663 Count | 1063 Count | 649 Count | 0 VDC | 0 VDC |
| 1745029499 | 599 Count | 969 Count | 586 Count | 0 VDC | 0 VDC |
| 1745027698 | 550 Count | 892 Count | 538 Count | 0 VDC | 0 VDC |
| 1745025898 | 507 Count | 826 Count | 496 Count | 0 VDC | 0 VDC |
| 1745024097 | 465 Count | 766 Count | 455 Count | 0 VDC | 0 VDC |
| 1745022297 | 424 Count | 705 Count | 415 Count | 0 VDC | 0 VDC |
| 1745020496 | 389 Count | 645 Count | 381 Count | 0 VDC | 0 VDC |
| 1745018696 | 350 Count | 580 Count | 343 Count | 0 VDC | 0 VDC |
| 1745016895 | 311 Count | 513 Count | 305 Count | 0 VDC | 0 VDC |
| 1745015094 | 269 Count | 443 Count | 264 Count | 0 VDC | 0 VDC |
| 1745013294 | 231 Count | 375 Count | 227 Count | 0 VDC | 0 VDC |
| 1745011493 | 188 Count | 305 Count | 185 Count | 0 VDC | 0 VDC |
| 1745009692 | 148 Count | 235 Count | 146 Count | 0 VDC | 0 VDC |
| 1745007892 | 108 Count | 170 Count | 107 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)