This is the latest recevied telemetry packets stored in our database for station/object SP9LJE-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761013652 | 12 Count | 89 Count | 12 Count | 0 VDC | 0 VDC |
| 1761011851 | 404 Count | 1047 Count | 360 Count | 0 VDC | 0 VDC |
| 1761010050 | 388 Count | 978 Count | 346 Count | 0 VDC | 0 VDC |
| 1761008250 | 373 Count | 917 Count | 332 Count | 0 VDC | 0 VDC |
| 1761006449 | 359 Count | 853 Count | 320 Count | 0 VDC | 0 VDC |
| 1761004648 | 346 Count | 783 Count | 308 Count | 0 VDC | 0 VDC |
| 1761002855 | 336 Count | 708 Count | 299 Count | 0 VDC | 0 VDC |
| 1761001054 | 322 Count | 634 Count | 287 Count | 0 VDC | 0 VDC |
| 1760999254 | 310 Count | 569 Count | 276 Count | 0 VDC | 0 VDC |
| 1760997453 | 298 Count | 513 Count | 266 Count | 0 VDC | 0 VDC |
| 1760995652 | 287 Count | 464 Count | 256 Count | 0 VDC | 0 VDC |
| 1760993852 | 274 Count | 413 Count | 244 Count | 0 VDC | 0 VDC |
| 1760992051 | 261 Count | 351 Count | 232 Count | 0 VDC | 0 VDC |
| 1760990250 | 249 Count | 315 Count | 221 Count | 0 VDC | 0 VDC |
| 1760988450 | 239 Count | 304 Count | 212 Count | 0 VDC | 0 VDC |
| 1760986649 | 228 Count | 287 Count | 202 Count | 0 VDC | 0 VDC |
| 1760984848 | 217 Count | 273 Count | 192 Count | 0 VDC | 0 VDC |
| 1760983048 | 205 Count | 258 Count | 181 Count | 0 VDC | 0 VDC |
| 1760981254 | 194 Count | 246 Count | 171 Count | 0 VDC | 0 VDC |
| 1760979454 | 183 Count | 235 Count | 161 Count | 0 VDC | 0 VDC |
| 1760977653 | 172 Count | 225 Count | 151 Count | 0 VDC | 0 VDC |
| 1760975852 | 161 Count | 215 Count | 141 Count | 0 VDC | 0 VDC |
| 1760974052 | 152 Count | 205 Count | 133 Count | 0 VDC | 0 VDC |
| 1760972251 | 141 Count | 193 Count | 123 Count | 0 VDC | 0 VDC |
| 1760970451 | 120 Count | 170 Count | 103 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)