This is the latest recevied telemetry packets stored in our database for station/object SR9SRC-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781897720 | 0 Count | 994 Count | 0 Count | 0 VDC | 0 VDC |
| 1781897120 | 0 Count | 987 Count | 0 Count | 0 VDC | 0 VDC |
| 1781896520 | 0 Count | 966 Count | 0 Count | 0 VDC | 0 VDC |
| 1781895920 | 0 Count | 962 Count | 0 Count | 0 VDC | 0 VDC |
| 1781895320 | 0 Count | 947 Count | 0 Count | 0 VDC | 0 VDC |
| 1781894720 | 0 Count | 935 Count | 0 Count | 0 VDC | 0 VDC |
| 1781894120 | 0 Count | 918 Count | 0 Count | 0 VDC | 0 VDC |
| 1781893520 | 0 Count | 911 Count | 0 Count | 0 VDC | 0 VDC |
| 1781892920 | 0 Count | 897 Count | 0 Count | 0 VDC | 0 VDC |
| 1781892319 | 0 Count | 894 Count | 0 Count | 0 VDC | 0 VDC |
| 1781891719 | 0 Count | 874 Count | 0 Count | 0 VDC | 0 VDC |
| 1781891119 | 0 Count | 862 Count | 0 Count | 0 VDC | 0 VDC |
| 1781890519 | 0 Count | 850 Count | 0 Count | 0 VDC | 0 VDC |
| 1781889919 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
| 1781889319 | 0 Count | 820 Count | 0 Count | 0 VDC | 0 VDC |
| 1781888719 | 0 Count | 812 Count | 0 Count | 0 VDC | 0 VDC |
| 1781888119 | 0 Count | 805 Count | 0 Count | 0 VDC | 0 VDC |
| 1781887519 | 0 Count | 796 Count | 0 Count | 0 VDC | 0 VDC |
| 1781886919 | 0 Count | 789 Count | 0 Count | 0 VDC | 0 VDC |
| 1781886319 | 0 Count | 788 Count | 0 Count | 0 VDC | 0 VDC |
| 1781885719 | 0 Count | 779 Count | 0 Count | 0 VDC | 0 VDC |
| 1781885119 | 0 Count | 772 Count | 0 Count | 0 VDC | 0 VDC |
| 1781884520 | 0 Count | 762 Count | 0 Count | 0 VDC | 0 VDC |
| 1781883920 | 0 Count | 757 Count | 0 Count | 0 VDC | 0 VDC |
| 1781883320 | 0 Count | 745 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)