This is the latest recevied telemetry packets stored in our database for station/object IZ7EXI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1756920882 | 751 Count | 936 Count | 472 Count | 0 VDC | 0 VDC |
| 1756920535 | 750 Count | 936 Count | 472 Count | 0 VDC | 0 VDC |
| 1756919732 | 748 Count | 933 Count | 471 Count | 0 VDC | 0 VDC |
| 1756918828 | 746 Count | 929 Count | 470 Count | 0 VDC | 0 VDC |
| 1756917923 | 744 Count | 925 Count | 469 Count | 0 VDC | 0 VDC |
| 1756917019 | 742 Count | 923 Count | 468 Count | 0 VDC | 0 VDC |
| 1756916115 | 740 Count | 918 Count | 467 Count | 0 VDC | 0 VDC |
| 1756915210 | 738 Count | 915 Count | 466 Count | 0 VDC | 0 VDC |
| 1756914306 | 736 Count | 912 Count | 465 Count | 0 VDC | 0 VDC |
| 1756913401 | 733 Count | 908 Count | 463 Count | 0 VDC | 0 VDC |
| 1756912497 | 731 Count | 906 Count | 462 Count | 0 VDC | 0 VDC |
| 1756911592 | 728 Count | 902 Count | 460 Count | 0 VDC | 0 VDC |
| 1756910688 | 707 Count | 882 Count | 440 Count | 0 VDC | 0 VDC |
| 1756909784 | 692 Count | 862 Count | 426 Count | 0 VDC | 0 VDC |
| 1756908879 | 689 Count | 841 Count | 424 Count | 0 VDC | 0 VDC |
| 1756907975 | 686 Count | 833 Count | 422 Count | 0 VDC | 0 VDC |
| 1756907070 | 683 Count | 830 Count | 420 Count | 0 VDC | 0 VDC |
| 1756906166 | 681 Count | 828 Count | 419 Count | 0 VDC | 0 VDC |
| 1756905261 | 678 Count | 825 Count | 417 Count | 0 VDC | 0 VDC |
| 1756904357 | 676 Count | 823 Count | 416 Count | 0 VDC | 0 VDC |
| 1756903453 | 674 Count | 821 Count | 415 Count | 0 VDC | 0 VDC |
| 1756902548 | 672 Count | 818 Count | 414 Count | 0 VDC | 0 VDC |
| 1756901644 | 670 Count | 816 Count | 413 Count | 0 VDC | 0 VDC |
| 1756900739 | 668 Count | 813 Count | 412 Count | 0 VDC | 0 VDC |
| 1756899835 | 665 Count | 810 Count | 410 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)