NYUAD APRS

My position About ☰

reset

SQ2MO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ2MO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*
1777959003	123 Count	374 Count	55 Count
1777958403	122 Count	372 Count	55 Count
1777957802	113 Count	356 Count	47 Count
1777957201	112 Count	355 Count	47 Count
1777956600	107 Count	346 Count	43 Count
1777956000	105 Count	342 Count	42 Count
1777955399	103 Count	337 Count	41 Count
1777954798	85 Count	299 Count	24 Count
1777954197	73 Count	273 Count	13 Count
1777953597	65 Count	241 Count	6 Count
1777952395	63 Count	189 Count	6 Count
1777951794	62 Count	182 Count	6 Count
1777951194	61 Count	180 Count	6 Count
1777950593	60 Count	173 Count	6 Count
1777949992	59 Count	170 Count	6 Count
1777948791	57 Count	164 Count	6 Count
1777948190	56 Count	161 Count	6 Count
1777947589	55 Count	159 Count	6 Count
1777946988	54 Count	157 Count	6 Count
1777946388	53 Count	154 Count	6 Count
1777945787	52 Count	151 Count	6 Count
1777944586	50 Count	146 Count	6 Count
1777943985	49 Count	144 Count	6 Count
1777942783	47 Count	138 Count	6 Count
1777942183	46 Count	135 Count	6 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: