This is the latest recevied telemetry packets stored in our database for station/object SP2HCA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761244444 | 98 Count | 152 Count | 76 Count | 4.14 VDC | 0.14 VDC |
| 1761243725 | 93 Count | 152 Count | 76 Count | 4.15 VDC | 0.14 VDC |
| 1761241923 | 88 Count | 144 Count | 72 Count | 4.19 VDC | 0.14 VDC |
| 1761240120 | 83 Count | 136 Count | 68 Count | 4.15 VDC | 0.14 VDC |
| 1761238317 | 78 Count | 129 Count | 64 Count | 4.19 VDC | 0.14 VDC |
| 1761227499 | 36 Count | 56 Count | 28 Count | 4.18 VDC | 0.14 VDC |
| 1761225696 | 20 Count | 31 Count | 13 Count | 4.19 VDC | 0.14 VDC |
| 1761223893 | 15 Count | 22 Count | 9 Count | 4.15 VDC | 0.14 VDC |
| 1761222124 | 8 Count | 15 Count | 7 Count | 4.14 VDC | 0.14 VDC |
| 1761220321 | 4 Count | 9 Count | 4 Count | 4.16 VDC | 0.14 VDC |
| 1761218518 | 634 Count | 1001 Count | 509 Count | 4.15 VDC | 0.14 VDC |
| 1761216716 | 629 Count | 994 Count | 505 Count | 4.2 VDC | 0.14 VDC |
| 1761214912 | 624 Count | 987 Count | 501 Count | 4.15 VDC | 0.14 VDC |
| 1761213110 | 616 Count | 976 Count | 494 Count | 4.2 VDC | 0.14 VDC |
| 1761211307 | 612 Count | 969 Count | 491 Count | 4.18 VDC | 0.14 VDC |
| 1761209504 | 607 Count | 964 Count | 487 Count | 4.18 VDC | 0.14 VDC |
| 1761207701 | 602 Count | 958 Count | 483 Count | 4.19 VDC | 0.14 VDC |
| 1761205898 | 597 Count | 953 Count | 479 Count | 4.18 VDC | 0.14 VDC |
| 1761204095 | 592 Count | 947 Count | 475 Count | 4.17 VDC | 0.14 VDC |
| 1761202292 | 587 Count | 942 Count | 471 Count | 4.16 VDC | 0.14 VDC |
| 1761200524 | 579 Count | 937 Count | 468 Count | 4.19 VDC | 0.14 VDC |
| 1761198720 | 571 Count | 927 Count | 461 Count | 4.18 VDC | 0.14 VDC |
| 1761196917 | 559 Count | 912 Count | 450 Count | 4.15 VDC | 0.14 VDC |
| 1761195114 | 547 Count | 891 Count | 439 Count | 4.2 VDC | 0.14 VDC |
| 1761193311 | 542 Count | 882 Count | 435 Count | 4.14 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)