This is the latest recevied telemetry packets stored in our database for station/object SP9KKK-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768696764 | 24 Count | 981 Count | 0 Count | 0 VDC | 0 VDC |
| 1768695863 | 22 Count | 867 Count | 0 Count | 0 VDC | 0 VDC |
| 1768694962 | 19 Count | 731 Count | 0 Count | 0 VDC | 0 VDC |
| 1768694061 | 17 Count | 628 Count | 0 Count | 0 VDC | 0 VDC |
| 1768693160 | 14 Count | 533 Count | 0 Count | 0 VDC | 0 VDC |
| 1768692259 | 12 Count | 438 Count | 0 Count | 0 VDC | 0 VDC |
| 1768691358 | 10 Count | 317 Count | 0 Count | 0 VDC | 0 VDC |
| 1768690458 | 6 Count | 193 Count | 0 Count | 0 VDC | 0 VDC |
| 1768689557 | 3 Count | 104 Count | 0 Count | 0 VDC | 0 VDC |
| 1768688656 | 24 Count | 1031 Count | 0 Count | 0 VDC | 0 VDC |
| 1768687755 | 23 Count | 930 Count | 0 Count | 0 VDC | 0 VDC |
| 1768686854 | 21 Count | 840 Count | 0 Count | 0 VDC | 0 VDC |
| 1768685952 | 18 Count | 775 Count | 0 Count | 0 VDC | 0 VDC |
| 1768685051 | 16 Count | 664 Count | 0 Count | 0 VDC | 0 VDC |
| 1768684151 | 13 Count | 549 Count | 0 Count | 0 VDC | 0 VDC |
| 1768683250 | 11 Count | 445 Count | 0 Count | 0 VDC | 0 VDC |
| 1768682349 | 8 Count | 376 Count | 0 Count | 0 VDC | 0 VDC |
| 1768681448 | 6 Count | 285 Count | 0 Count | 0 VDC | 0 VDC |
| 1768680547 | 3 Count | 192 Count | 0 Count | 0 VDC | 0 VDC |
| 1768679646 | 2 Count | 95 Count | 0 Count | 0 VDC | 0 VDC |
| 1768678744 | 21 Count | 1027 Count | 0 Count | 0 VDC | 0 VDC |
| 1768677844 | 19 Count | 910 Count | 0 Count | 0 VDC | 0 VDC |
| 1768676943 | 17 Count | 800 Count | 0 Count | 0 VDC | 0 VDC |
| 1768676041 | 14 Count | 671 Count | 0 Count | 0 VDC | 0 VDC |
| 1768675140 | 11 Count | 597 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)