This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1749216056 | 321 Count | 939 Count | 306 Count | 4.4 VDC | 0 VDC |
| 1749214256 | 301 Count | 861 Count | 287 Count | 4.41 VDC | 0 VDC |
| 1749212462 | 268 Count | 768 Count | 259 Count | 4.4 VDC | 0 VDC |
| 1749210661 | 241 Count | 679 Count | 233 Count | 4.4 VDC | 0 VDC |
| 1749208860 | 200 Count | 581 Count | 193 Count | 4.39 VDC | 0 VDC |
| 1749207060 | 152 Count | 486 Count | 146 Count | 4.41 VDC | 0 VDC |
| 1749205259 | 128 Count | 404 Count | 123 Count | 4.41 VDC | 0 VDC |
| 1749203458 | 109 Count | 333 Count | 105 Count | 4.39 VDC | 0 VDC |
| 1749201658 | 89 Count | 267 Count | 86 Count | 4.4 VDC | 0 VDC |
| 1749199857 | 74 Count | 201 Count | 72 Count | 4.39 VDC | 0 VDC |
| 1749198056 | 38 Count | 115 Count | 37 Count | 4.39 VDC | 0 VDC |
| 1749196256 | 13 Count | 43 Count | 13 Count | 4.39 VDC | 0 VDC |
| 1749194455 | 519 Count | 1066 Count | 467 Count | 4.39 VDC | 0 VDC |
| 1749192655 | 500 Count | 998 Count | 449 Count | 4.39 VDC | 0 VDC |
| 1749190861 | 479 Count | 947 Count | 433 Count | 4.39 VDC | 0 VDC |
| 1749189060 | 457 Count | 878 Count | 412 Count | 4.4 VDC | 0 VDC |
| 1749187259 | 439 Count | 814 Count | 395 Count | 4.38 VDC | 0 VDC |
| 1749185459 | 413 Count | 785 Count | 370 Count | 4.41 VDC | 0 VDC |
| 1749183658 | 401 Count | 765 Count | 359 Count | 4.39 VDC | 0 VDC |
| 1749181857 | 386 Count | 725 Count | 345 Count | 4.39 VDC | 0 VDC |
| 1749180057 | 369 Count | 669 Count | 329 Count | 4.41 VDC | 0 VDC |
| 1749178256 | 350 Count | 607 Count | 311 Count | 4.39 VDC | 0 VDC |
| 1749176455 | 326 Count | 535 Count | 288 Count | 4.4 VDC | 0 VDC |
| 1749174655 | 302 Count | 465 Count | 265 Count | 4.4 VDC | 0 VDC |
| 1749172854 | 277 Count | 397 Count | 241 Count | 4.39 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)