This is the latest recevied telemetry packets stored in our database for station/object WD4ITE-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751872690 | 350 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751872089 | 349 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751871488 | 348 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751870887 | 347 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751870286 | 346 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751848112 | 309 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751847512 | 308 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751846911 | 307 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751846310 | 306 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751845710 | 305 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751845109 | 304 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751844508 | 303 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751843907 | 302 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751843307 | 301 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751842705 | 300 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751842105 | 299 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751841504 | 298 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751840903 | 297 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751840303 | 296 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751839702 | 295 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751839101 | 294 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751838500 | 293 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751837899 | 292 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751837298 | 291 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1751836698 | 290 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)