This is the latest recevied telemetry packets stored in our database for station/object SP9APJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772539618 | 135 Count | 831 Count | 111 Count | 0 VDC | 0 VDC |
| 1772537817 | 131 Count | 809 Count | 108 Count | 0 VDC | 0 VDC |
| 1772536017 | 127 Count | 785 Count | 105 Count | 0 VDC | 0 VDC |
| 1772534216 | 121 Count | 757 Count | 100 Count | 0 VDC | 0 VDC |
| 1772532415 | 114 Count | 731 Count | 94 Count | 0 VDC | 0 VDC |
| 1772527013 | 94 Count | 625 Count | 77 Count | 0 VDC | 0 VDC |
| 1772525213 | 88 Count | 592 Count | 72 Count | 0 VDC | 0 VDC |
| 1772523412 | 85 Count | 564 Count | 70 Count | 0 VDC | 0 VDC |
| 1772521611 | 79 Count | 527 Count | 65 Count | 0 VDC | 0 VDC |
| 1772519811 | 74 Count | 485 Count | 61 Count | 0 VDC | 0 VDC |
| 1772518017 | 63 Count | 447 Count | 55 Count | 0 VDC | 0 VDC |
| 1772516216 | 57 Count | 405 Count | 50 Count | 0 VDC | 0 VDC |
| 1772514415 | 50 Count | 362 Count | 44 Count | 0 VDC | 0 VDC |
| 1772512615 | 42 Count | 313 Count | 37 Count | 0 VDC | 0 VDC |
| 1772510814 | 35 Count | 262 Count | 31 Count | 0 VDC | 0 VDC |
| 1772509013 | 27 Count | 193 Count | 24 Count | 0 VDC | 0 VDC |
| 1772507213 | 16 Count | 143 Count | 14 Count | 0 VDC | 0 VDC |
| 1772505412 | 10 Count | 97 Count | 9 Count | 0 VDC | 0 VDC |
| 1772503612 | 4 Count | 52 Count | 4 Count | 0 VDC | 0 VDC |
| 1772501811 | 190 Count | 1012 Count | 148 Count | 0 VDC | 0 VDC |
| 1772500010 | 182 Count | 958 Count | 141 Count | 0 VDC | 0 VDC |
| 1772498210 | 175 Count | 911 Count | 135 Count | 0 VDC | 0 VDC |
| 1772496416 | 164 Count | 871 Count | 129 Count | 0 VDC | 0 VDC |
| 1772494615 | 158 Count | 826 Count | 124 Count | 0 VDC | 0 VDC |
| 1772492815 | 152 Count | 794 Count | 119 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)