This is the latest recevied telemetry packets stored in our database for station/object SQ8RZE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766017364 | 157 Count | 361 Count | 137 Count | 0 VDC | 0 VDC |
| 1766015556 | 125 Count | 309 Count | 107 Count | 0 VDC | 0 VDC |
| 1766014655 | 114 Count | 284 Count | 97 Count | 0 VDC | 0 VDC |
| 1766013754 | 104 Count | 263 Count | 88 Count | 0 VDC | 0 VDC |
| 1766012981 | 91 Count | 245 Count | 80 Count | 0 VDC | 0 VDC |
| 1766012074 | 82 Count | 223 Count | 72 Count | 0 VDC | 0 VDC |
| 1766011169 | 71 Count | 201 Count | 62 Count | 0 VDC | 0 VDC |
| 1766010261 | 61 Count | 177 Count | 53 Count | 0 VDC | 0 VDC |
| 1766009353 | 55 Count | 155 Count | 48 Count | 0 VDC | 0 VDC |
| 1766008447 | 44 Count | 134 Count | 38 Count | 0 VDC | 0 VDC |
| 1766007542 | 40 Count | 119 Count | 35 Count | 0 VDC | 0 VDC |
| 1766006633 | 34 Count | 102 Count | 30 Count | 0 VDC | 0 VDC |
| 1766005726 | 32 Count | 87 Count | 29 Count | 0 VDC | 0 VDC |
| 1766004824 | 13 Count | 56 Count | 11 Count | 0 VDC | 0 VDC |
| 1766003920 | 9 Count | 37 Count | 8 Count | 0 VDC | 0 VDC |
| 1766003012 | 3 Count | 21 Count | 3 Count | 0 VDC | 0 VDC |
| 1766002109 | 365 Count | 1015 Count | 309 Count | 0 VDC | 0 VDC |
| 1766001199 | 357 Count | 994 Count | 302 Count | 0 VDC | 0 VDC |
| 1766000291 | 355 Count | 978 Count | 301 Count | 0 VDC | 0 VDC |
| 1765999388 | 344 Count | 958 Count | 291 Count | 0 VDC | 0 VDC |
| 1765998479 | 338 Count | 938 Count | 286 Count | 0 VDC | 0 VDC |
| 1765997571 | 330 Count | 917 Count | 279 Count | 0 VDC | 0 VDC |
| 1765996670 | 327 Count | 898 Count | 277 Count | 0 VDC | 0 VDC |
| 1765995768 | 320 Count | 877 Count | 271 Count | 0 VDC | 0 VDC |
| 1765994864 | 316 Count | 865 Count | 268 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)