NYUAD APRS

My position About ☰

reset

KF6IF-7 Raw Packets

This is the latest recevied packets stored in our database for station/object KF6IF-7. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

1765989843: KF6IF-7>APN000,TCPIP*,qAC,T2BC:=3313.95N\11720.06WvVoice 146.520

1765989841: KF6IF-7>APN000,TCPIP*,qAC,T2BC:=3313.95N\11720.05WvVoice 146.520 [Duplicate]

1765989395: KF6IF-7>APN000,TCPIP*,qAC,T2MCI:=3313.96N\11720.05Wv356/002Voice 146.520 145.050MHz

1765989389: KF6IF-7>APN000,TCPIP*,qAC,T2MCI:=3313.96N\11720.05WvVoice 146.520

1765988836: KF6IF-7>APN000,TCPIP*,qAC,T2CAWEST:=3313.95N\11720.05WvVoice 146.520

1765988800: KF6IF-7>APN000,TCPIP*,qAC,T2CAWEST:=3313.95N\11720.05WvVoice 146.520 144.390MHz 7.9V

1765988681: KF6IF-7>APN000,TCPIP*,qAC,T2CAWEST:=3313.95N\11720.05WvVoice 146.520

1765988255: KF6IF-7>APN000,TCPIP*,qAC,T2RDU:=3313.95N\11720.05WvVoice 146.520

1765987955: KF6IF-7>APN000,TCPIP*,qAC,T2RDU:=3313.95N\11720.05WvVoice 146.520

1765987655: KF6IF-7>APN000,TCPIP*,qAC,T2RDU:=3313.95N\11720.05WvVoice 146.520

1765987584: KF6IF-7>APN000,TCPIP*,qAC,T2RDU:=3313.95N\11720.05WvVoice 146.520

1765985147: KF6IF-7>APN000,TCPIP*,qAC,T2TEXAS:=3313.95N\11720.05WvVoice 146.520 144.390MHz

1765984237: KF6IF-7>APN000,TCPIP*,qAC,T2MCI:=3313.94N\11720.04Wv129/003Voice 146.520

1765983810: KF6IF-7>APN000,TCPIP*,qAC,T2MCI:=3313.94N\11720.04Wv129/003Voice 146.520

1765983427: KF6IF-7>APN000,TCPIP*,qAC,T2MCI:=3313.94N\11720.04Wv129/003Voice 146.520

1765982788: KF6IF-7>APN000,TCPIP*,qAC,T2MCI:=3313.94N\11720.04Wv129/003Voice 146.520

1765982062: KF6IF-7>APN000,TCPIP*,qAC,T2MCI:=3313.94N\11720.04Wv129/003Voice 146.520

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: