NYUAD APRS

My position About ☰

reset

LB2AJ-7 Raw Packets

This is the latest recevied packets stored in our database for station/object LB2AJ-7. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

1774885364: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.t@4P*lj[@[Q**LowVoltagePowerOff**

1774884672: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.tAPP*o0[=_Q

1774883272: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.tCHP*qs[@SQ Bat=3.14V 11%

1774882772: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.tAjP*or[@cQ

1774881867: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.tACP*ok[?wQ

1774880952: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.tB1P*o0[@NQ

1774880077: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.tA]P*q9[C_Q

1774879175: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.tBWP*p@[@'Q

1774878909: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.t?^P*po[A#Q

1774877061: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.t@iP*v>[CpQ

1774876814: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.tBeP*xF[@AQ

1774876082: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.t?wP*v>[!!Q Bat=3.37V 30%

1774876064: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.t@9P*v4[@iQ

1774875159: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.t?hP*v/[@SQ

1774874244: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.t?hP*v-[@iQ

1774873339: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.t?^P*v7[!!Q Bat=3.19V 15%

1774872844: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.tA)P*v![!!Q Bat=3.24V 20%

1774872833: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.t>vP*vF[CGQ Bat=3.25V 20%

1774872747: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.t@bP*v2[!!Q Bat=3.27V 22%

1774872694: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.t?SP*vM[@pQ

1774872419: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.tTpP*,<[!!Q Bat=3.36V 29%

1774872057: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.t[YP){&[@)Q

1774871802: LB2AJ-7>APLRT1,WIDE1-1,WIDE2-1,qAR,LB2AJ-10:=/.tUxP)Qh[!!Q Bat=3.01V 0%

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: